Basement Waterproofing in Country Club Heights

The installation team completed a comprehensive structural reinforcement project in the basement to restore proper load support and improve the overall stability of the home's floor system. The work included the installation of 13 linear feet of structural steel I-beam to reinforce the existing framing and provide continuous load-bearing support across the affected area. The beam was carefully positioned and secured to distribute structural loads more effectively and reduce floor deflection. In addition, four basement support posts were replaced to restore proper vertical support beneath the steel beam and floor framing. Each replacement post was properly aligned and installed to ensure stable load transfer and long-term structural performance. To further strengthen the floor system, two full-length sister joists were installed alongside the existing floor joists to reinforce weakened framing members and restore structural integrity. These repairs improve load distribution, reduce excessive floor movement, and provide a durable, long-term solution for maintaining the stability and performance of the basement support system.

The installation team completed the installation of 149 linear feet of AmeriDrain® interior crawlspace drainage system along the foundation perimeter to effectively intercept groundwater intrusion and relieve hydrostatic pressure at the footing level. The drainage system was carefully positioned to ensure consistent water collection and proper flow toward one AmeriSump® sump station, which was installed to collect and pump water safely away from the home. To further control ground moisture and humidity, 1,344 square feet of reinforced vapor barrier was installed across the crawlspace floor and sealed along foundation surfaces to create a continuous moisture barrier. The sump system was connected to a 30-foot exterior discharge line that directs water away from the foundation and into a dry well, allowing water to safely disperse into the surrounding soil. Together, these components provide effective water management, reduce moisture levels within the crawlspace, and help protect the structural integrity of the home over the long term.

This home received a waterproofing upgrade with the installation of 138 linear feet of the AkwaGuard Basement Drainage System. This system was designed to collect and direct water away from the foundation, helping to keep the basement dry and protected. A SuperSump sump station was installed to ensure reliable pumping capacity, while an UltraSump battery backup system was added in case of power outages. In addition, the crawl spaces attached to the basement were treated with a full Timbor spray application, safeguarding all exposed wood against mold, mildew.

Americrawl completed a full crawl space cleanout and encapsulation project for this homeowner to address ongoing moisture and structural concerns. The project began with a complete crawl space cleanout, removing debris and preparing the area for installation. A 136-foot AmeriDrain drainage system was installed to effectively capture and redirect groundwater away from the foundation. This system was paired with one AmeriSump sump station to ensure proper collection and discharge of water from the crawl space. The team then installed 850 square feet of CleanSpace encapsulation system, sealing the crawl space floor and walls with a heavy-duty vapor barrier to block humidity and prevent mold growth. A new crawl space access door was also added, providing a clean, secure entry point for maintenance and inspection. To further protect the wood framing, 850 square feet of Timbor Spray treatment was applied to all exposed wood surfaces, safeguarding against mold, fungi, and insect damage.

This project involves comprehensive structural repairs to the floor framing system to restore strength, stability, and long-term durability. The scope of work includes the removal and replacement of 66 feet of deteriorated 2×6 sill plate along the perimeter of the structure. This process involves carefully lifting and supporting the affected sections of the building, removing damaged material, and installing new pressure-treated 2×6 sill plates anchored securely to the foundation. All components will be leveled and properly sealed to ensure a solid connection between the framing and foundation. In addition to the sill plate work, the project includes reinforcing the floor system by installing 45 sistered 2×10 joists. Each sister joist will be fitted alongside existing compromised joists, extending to the maximum feasible length to ensure proper load transfer. Construction adhesive and mechanical fasteners will be used to bond and secure the joists according to structural best practices. The sistering process will restore rigidity, reduce deflection, and strengthen the overall floor structure. The scope also includes the full replacement of 6 floor joists that are beyond repair. These damaged joists will be removed in full and replaced with new, full-length 2×10 joists installed with proper bearing on the sill plate and correctly tied into the existing framing. All connections will meet current building standards and ensure continuity with the surrounding structural members.

The installation team completed a comprehensive crawlspace waterproofing and structural repair project to address both moisture intrusion and compromised framing beneath the home. The work included the installation of 162 linear feet of AmeriDrain interior crawlspace drainage system along the foundation perimeter to intercept groundwater intrusion and relieve hydrostatic pressure at the footing level. The drainage system was routed to one AmeriSump sump station, which was installed to efficiently collect and discharge water away from the home through a dedicated exterior discharge line. In addition to the waterproofing improvements, significant structural repairs were performed to restore the integrity of the floor system. The project included the replacement of 38 linear feet of damaged rim joist and sill plate, along with an additional 6 linear feet of sill plate repair in areas affected by moisture deterioration. To address weakened framing beneath the bathroom, three full-length floor joists were installed to provide proper load support and restore the structural capacity of the floor system.

To restore structural integrity, we replaced 10 feet of rim joist and plate, 12 feet of sill plate, and 1 full-length floor joist, reinforcing the crawl space and ensuring proper support for the home above.

Americrawl provided a complete solution to repair a wet crawlspace in Anderson, Indiana. The project began with a full debris clean-out, followed by the installation of a 1,144 sq. ft. drainage system designed to capture and redirect groundwater to a reliable sump pump with a durable sump pump liner. A discharge line with a bubbler well was added to carry water safely away from the foundation. To further protect the space, a 1,144 sq. ft. vapor barrier was installed to seal the crawlspace from ground moisture. Americrawl also replaced seven foundation vents, upgraded the crawlspace door and frame, and added 114 linear feet of 2” foundation foam insulation for improved energy efficiency and moisture control. These comprehensive crawlspace repair solutions help ensure a dry, healthy, and protected foundation for years to come.