Basement Waterproofing, Crawl Space & Foundation Repair in Woodlawn Heights

The installation team completed a comprehensive crawlspace waterproofing and structural restoration project designed to address both moisture intrusion and compromised framing conditions beneath the home. The work included the installation of 146 linear feet of AmeriDrain interior crawlspace drainage system along the foundation perimeter to intercept groundwater intrusion and relieve hydrostatic pressure at the footing level. The drainage system was directed to one AmeriSump sump station, which was installed to efficiently collect and discharge water away from the home through a dedicated exterior discharge line. The project began with a complete crawlspace cleanout, removing debris and organic materials to create a clean and accessible work area. In addition, three crawlspace vents were replaced to improve ventilation and restore the condition of the foundation openings. To further control moisture and humidity, a 6-mil black vapor barrier was installed across the crawlspace floor to help prevent ground moisture from migrating into the space. Extensive structural wood repairs were also completed to restore the integrity of the floor system and supporting framework. The repairs included replacement of 90 linear feet of sill plate, 30 linear feet of rim joist and plate, installation of four full-length floor joists, and reinforcement of the existing framing with twenty sister joists. These repairs were performed to replace moisture-damaged and deteriorated wood components, improve load distribution, and restore proper structural support throughout the affected areas.

The installation team completed a comprehensive crawlspace waterproofing and structural repair project to address both moisture intrusion and compromised framing beneath the home. The work included the installation of 162 linear feet of AmeriDrain interior crawlspace drainage system along the foundation perimeter to intercept groundwater intrusion and relieve hydrostatic pressure at the footing level. The drainage system was routed to one AmeriSump sump station, which was installed to efficiently collect and discharge water away from the home through a dedicated exterior discharge line. In addition to the waterproofing improvements, significant structural repairs were performed to restore the integrity of the floor system. The project included the replacement of 38 linear feet of damaged rim joist and sill plate, along with an additional 6 linear feet of sill plate repair in areas affected by moisture deterioration. To address weakened framing beneath the bathroom, three full-length floor joists were installed to provide proper load support and restore the structural capacity of the floor system.

This project involved the installation of 210 linear feet of the AmeriDrain Drainage System, designed to effectively manage groundwater and prevent moisture intrusion in the crawl space. To enhance water removal efficiency, we installed one AmeriSump sump station, providing a reliable discharge point for collected water. In addition, we installed a high-quality 6-mil vapor barrier across the crawl space floor, offering superior moisture protection and reducing humidity levels. This barrier plays a crucial role in improving indoor air quality and protecting structural components from long-term damage caused by moisture. As part of the project, we also completed structural wood repairs, addressing compromised sill plates, rim joists, and other framing members affected by moisture or deterioration. This reinforcement ensures the stability, safety, and longevity of the home’s foundation and support structure.

Americrawl completed a crawl space waterproofing and structural repair project that included the installation of 139 linear feet of AmeriDrain drainage system, one AmeriSump sump station, and 1,385 square feet of vapor barrier to protect the area from moisture and humidity. During inspection, sections of the sill plate were found to be deteriorated from long-term moisture exposure. Our team replaced 10 feet of damaged sill plate with new pressure-treated lumber, restoring the integrity of the foundation support. The newly installed AmeriDrain system efficiently channels groundwater into the AmeriSump pump system, which discharges it safely away from the home. The 6-mil vapor barrier was then placed across the crawl space floor to reduce humidity, mold potential, and future wood damage.

This project included a combination of structural wood repairs and crawl space waterproofing upgrades. Our team replaced 30 feet of rim joist and plate, completed 18 feet of sill plate repair, and installed 1 sister joist to reinforce weakened structural framing. To address moisture intrusion, we installed 138 linear feet of AmeriDrain drainage system along the crawl space perimeter, directing groundwater into one AmeriSump sump station for reliable water removal. The moisture control system was further improved with 900 square feet of vapor barrier, providing a sealed moisture barrier across the crawl space floor. Additionally, seven crawl space vent replacements were installed to improve ventilation and overall system efficiency.

The installation team completed the installation of 149 linear feet of AmeriDrain® interior crawlspace drainage system along the foundation perimeter to effectively intercept groundwater intrusion and relieve hydrostatic pressure at the footing level. The drainage system was carefully positioned to ensure consistent water collection and proper flow toward one AmeriSump® sump station, which was installed to collect and pump water safely away from the home. To further control ground moisture and humidity, 1,344 square feet of reinforced vapor barrier was installed across the crawlspace floor and sealed along foundation surfaces to create a continuous moisture barrier. The sump system was connected to a 30-foot exterior discharge line that directs water away from the foundation and into a dry well, allowing water to safely disperse into the surrounding soil. Together, these components provide effective water management, reduce moisture levels within the crawlspace, and help protect the structural integrity of the home over the long term.

Americrawl provided a complete solution to repair a wet crawlspace in Anderson, Indiana. The project began with a full debris clean-out, followed by the installation of a 1,144 sq. ft. drainage system designed to capture and redirect groundwater to a reliable sump pump with a durable sump pump liner. A discharge line with a bubbler well was added to carry water safely away from the foundation. To further protect the space, a 1,144 sq. ft. vapor barrier was installed to seal the crawlspace from ground moisture. Americrawl also replaced seven foundation vents, upgraded the crawlspace door and frame, and added 114 linear feet of 2” foundation foam insulation for improved energy efficiency and moisture control. These comprehensive crawlspace repair solutions help ensure a dry, healthy, and protected foundation for years to come.

Americrawl completed a full crawl space cleanout and encapsulation project for this homeowner to address ongoing moisture and structural concerns. The project began with a complete crawl space cleanout, removing debris and preparing the area for installation. A 136-foot AmeriDrain drainage system was installed to effectively capture and redirect groundwater away from the foundation. This system was paired with one AmeriSump sump station to ensure proper collection and discharge of water from the crawl space. The team then installed 850 square feet of CleanSpace encapsulation system, sealing the crawl space floor and walls with a heavy-duty vapor barrier to block humidity and prevent mold growth. A new crawl space access door was also added, providing a clean, secure entry point for maintenance and inspection. To further protect the wood framing, 850 square feet of Timbor Spray treatment was applied to all exposed wood surfaces, safeguarding against mold, fungi, and insect damage.

Our expert crew completed a comprehensive crawlspace drainage and moisture-control project designed to protect the home's foundation and structural components. The project included the installation of 116 linear feet of AmeriDrain to collect and redirect groundwater away from the foundation, helping reduce the risk of standing water and ongoing moisture intrusion. The drainage system was connected to one AmeriSump sump pump system to provide reliable removal of collected groundwater and help maintain a drier crawlspace environment. Our crew also installed one steel crawlspace access door to provide a durable and secure entry point while helping protect the crawlspace from outside elements. To address moisture-related concerns and protect the structural wood components, 1,008 square feet of Timbor Spray was applied throughout the crawlspace to help address fungal growth and reduce the potential for further wood deterioration.

This project involves comprehensive structural repairs to the floor framing system to restore strength, stability, and long-term durability. The scope of work includes the removal and replacement of 66 feet of deteriorated 2×6 sill plate along the perimeter of the structure. This process involves carefully lifting and supporting the affected sections of the building, removing damaged material, and installing new pressure-treated 2×6 sill plates anchored securely to the foundation. All components will be leveled and properly sealed to ensure a solid connection between the framing and foundation. In addition to the sill plate work, the project includes reinforcing the floor system by installing 45 sistered 2×10 joists. Each sister joist will be fitted alongside existing compromised joists, extending to the maximum feasible length to ensure proper load transfer. Construction adhesive and mechanical fasteners will be used to bond and secure the joists according to structural best practices. The sistering process will restore rigidity, reduce deflection, and strengthen the overall floor structure. The scope also includes the full replacement of 6 floor joists that are beyond repair. These damaged joists will be removed in full and replaced with new, full-length 2×10 joists installed with proper bearing on the sill plate and correctly tied into the existing framing. All connections will meet current building standards and ensure continuity with the surrounding structural members.